Elevate will abort calculations where the Capacity Factor by Mass is greater than 100%, as the configuration is clearly unacceptable. On the results printout for this configuration, the following message will be displayed: “This configuration has been rejected because the required handling capacity cannot be achieved without increasing the size or number of the cars.”
If you are using the Report Options, Elevate will also discard configurations that do not meet any of the specified criteria. In this case, the results printout will show the message: “This configuration has been rejected due to the Report Options parameters.”
If no results are shown, consider adjusting the Report Options, reducing the amount of traffic, or increasing the elevator specifications.
If all configurations are either invalid or have been rejected due to the Report Options settings, the summary results page will display the message: “All results are either invalid, or have been rejected due to the Report Options settings.”
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article