These inputs are only available when the Energy Model has been turned on in Analysis Data. For each car, the power consumed during a journey can be defined for different loads (0%, 25%, 75%, 100%), in both up and down directions.
The kW Drive on input is the energy consumed when the car is idle. Some systems have a standby mode which takes less power; this can be modelled by specifying a different kW Drive off value. Elevate models the system going into and out of the standby mode using the shutdown time and restart time inputs.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article