Floor level and floor height

First use the radio buttons to the right of the table to specify whether you want to enter the height of each floor (e.g. 5 m, 3.6 m, 3.6 m) or the level of each floor (e.g. 0 m, 5 m, 8.6 m, 12.2 m). If you enter floor heights, you don’t need to enter the height of the top floor as the car does not travel beyond the floor itself; for this reason, Elevate does not save this data.

You can enter floor levels or heights individually. However, we recommend that you use one of the speed-fill functions. Either use the Speed fill table button or, if entering floor heights:

• Enter 3.6 in row 1 of the Floor Height column and press Return.
• Click again on the cell in row 1 of the Floor Height column to select it.
• Point to the bottom right-hand corner of the cell (the pointer will turn into a small cross).
• Click and drag the black cross down the table.